In winter the most need hot water, why the
solar water heater basically can't use? There are two reasons for: one is the environment temperature is too low, radiator inside and outside temperature is too big, cause the heat loss too much. Secondly introduced from the cistern of indoor fluctuation conduit at low temperatures, standing frozen tube, causing pipeline impassability. The emperor bright solar
For the first question, can use thickening insulation, change the position of the exhaust measures, reduce heat loss, but for the second question is not easily solved, at present the emperor bright group, is the most commonly used method in conduit of electric heating winding outside, electric heating ice dredge pipe, such not only consumes electricity, and use occur frequently in the accident, plus longevity long wait for a reason, make popularizing application, proved the move only there is no way to approach.
1. Want above all water tank water and drain road closed, blocking the cistern respectively the water into the fluctuation conduit.
2. Will on the top of the conduit and hoses respectively and atmospheric conduction, assure pipe down from the standing air pipe, made from upper into drainage process from the influence of atmospheric pressure.
3. At the next when water, and also can automatically converts conduit top and atmospheric interlinked stomatal closure, prevent water from the stomata in outflow.
4. Will the water tank pipe and hoses road, ensure respectively automatically open water and downstream processes normal operation.
5. The emperor bright group because water pipe and hoses way to separate automatic control, making the complicated control link number and doubled in this many tache, as long as a link to malfunction, can make whole emptying system failure. So early someone once by electromagnetic valve control these links, but because the job is not reliable and failure, so the requirement to control these links must not use solenoid valves.
6. In the winter, if only DiShuiChengBing fluctuation conduit emptying, a set of control emptying devices exposing outdoor, can cause control device internal frozen, also appeared unable to use the end, so installation emptying control device of water tank, must contain special heat preservation of the control room, will control device installed in insulation control room, the gridhrakuta mountain.
7. In solving problems at the same time, still emptying of the automatic filling water problems must be solved, make cistern always maintain full of water state, ability assures users in the water, a opening out hot water.
