Pressurized Solar Water Heater
Product advantage:
Sharing:  
0
  • Introduction

Pressurized Solar Water Heater GI

 

1.Material of out tank:Anti-corrosion 0.35-0.4mm thickness Galvanized steel

2.Material of inner tank: Food grade 1.2-2.0mm thickness SUS304/316 stainless steel

3.Tank insulation layer 50mm~ 55mm 45kg/m³ high-density polyurethane foamed

4.Bracket: 1.5mm thickness Galvanized Steel

5.Tank Structure: 5 holes including air vent,water inlet and outlet,electric heater,magnesium Rod

6.Solar collector tube: Three Target 3.3 Borosilicate glass with N/Al coating ,1.6mm thickness

7. Heat Pipe: Red Copper .Head: Ø24* 1mm; Body: Ø8* 0.6mm thickness,1600mm Length

8.Inlet and outlet hole Male G 1/2, 3/4

9.Max pressure :9Bar 

10.Vacuum tube tightness P≤0.005 Pa

11.Absorption as=0.93-0.96(AM1.5)

12.Emission ratio εh=0.04-0.06(80C±5C)

13.Idle sunning property parameters Y=220~260m2.C/KW

14.Average heat loss coefficient ULT=0.6~0.7W/(m2.C)

15.Welding: Argon arc welding

16.Fastening pieces: Made of stainless steel screw

f1.png 

 

Compact pressuirzed solar water heater working principle:

1.The pressurized water tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.

2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressure solar water heater tank. In this case, the water inside the tank becomes hot

3.No water in the heat pipe makes the whole system could bear pressure

 

f2.png 

 

 

Pressure solar water heater features

1.Adopts the best conduction performance metal- heat pipe (copper) 
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized water tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa 
5.No water in the tube, one tube broken don't influence the system working 
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof 

8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out

 

 

 

 

 

 

Optional accessories 


1. TK-7Y Intelligence Controller 

f3.png

 

 

 

2. Electrical heater: 1.5/2/2.5kw

f4.png 

4.Magnesium Rod

f5.png 

 

Warranty&Service :

1. 5 years warranty for Optional accessories:Electric heater,Controllers,Magnesium rod.

2. 7 Years Warranty For Solar water Heater Tank

3.15years warranty for solar collector

4. Lifelong after-sale Service for valves and standard parts

 

 

5.Charge Free for LOGO Printing&Design

6.Small replacement part (<2kgs) will be sent to overseas customers

7. 1.5%  Replacement Vacuum Tubes will be sent for Free per container 


0.1387s